Hot Products
01
High-Performance Co12 Cobalt-Based Alloy from China Suppliers: Superior Wear Resistance for Extreme Conditions
Chemical Composition and Element Functions
Co: Balance
Provides thermal stability, toughness, and corrosion resistance.
C: 1.5%
Ups hardness and wear resistance.
Cr: 30.5%
Forms a dense Cr₂O₃ oxide layer for resistance to acids, alkalis, and salts.
W: 8.0%
Significantly enhances high-temperature strength, creep resistance, and erosion resistance.
Fe/Ni: 2.5% Each
Improve processability and reduce cost; nickel also boosts corrosion resistance slightly.
Si: 1.5%
Deoxidizer to minimize defects during powder metallurgy.
Core Performance Advantages
Ultra-High Hardness and Wear Resistance
Rockwell Hardness (HRC): 40–50 HRC (up to 55 HRC after heat treatment);
Vickers Hardness (HV): ~1500–1700 HV;
High carbon (1.5%) and tungsten (8.0%) form hard WC precipitates, enhancing resistance to high-stress friction and particle erosion (e.g., gears, screws in continuous operation).
Excellent Thermal Stability
Melting point: ~1480°C (far exceeding ordinary steel and nickel-based alloys);
Maintains structural integrity at temperatures up to 800°C, thanks to cobalt’s solid-solution strengthening and tungsten’s creep resistance.
Strong Corrosion Resistance
Chromium oxide (Cr₂O₃) layer resists acids (e.g., HCl, H₂SO₄), alkalis, and saline solutions;
Less resistant to HF and concentrated HNO₃ (avoid exposure to strong reducing environments).
Resistance to Cavitation and Fatigue
Gas atomization ensures high powder density (>99.5%), minimizing residual stress and cavitation risk;
Cobalt’s inherent toughness provides fatigue resistance for cyclic loads (e.g., valve actuation).
Production Process
Gas Atomization Powder Metallurgy (PM)
Molten metal is atomized using inert gases (argon/nitrogen), yielding spherical, low-porosity powder with excellent flowability for precision molding (e.g., thermal spraying, 3D printing).
High-density sintering (>99.5% dense, <0.1% porosity) ensures mechanical properties and durability.
Heat Treatment
Quenching + Tempering: Enhances hardness-toughness balance (e.g., 1100°C quenching + 600°C tempering yields HRC 50);
Nitriding/Carbonitriding: Surface hardness can reach HRC 60+ for extended wear life.
Typical Applications
High-Temperature and High-Pressure Valves
Used in petrochemical and natural gas sectors for ball valves, gate valves, and check valves exposed to high-temperature steam (>500°C) and corrosive media (e.g., sulfur-containing natural gas).
Screws and Saw Teeth
Injection molding screws, compressor rotors, and woodworking saw blades requiring resistance to frictional heat and particulate erosion.
Surface Coatings and Cladding
Deposited onto steel or low-alloy steel substrates to improve wear and corrosion resistance (e.g., mining machinery gears, pump linings); High-temperature components in aerospace (e.g., rocket engine nozzles, combustion chamber liners).
Nuclear and Energy Industries
Fuel rod supports, high-temperature steam pipes in nuclear reactors; Superheater tubes in coal-fired power plants resistant to thermal oxidation and stress corrosion cracking.
Considerations
· Processing Challenges: High hardness necessitates the use of carbide tools or laser cutting; welding is difficult and requires brazing or explosive bonding.
· Environmental Limits: Avoid exposure to HF or strong reducing environments; high carbon may reduce impact resistance.
· Alternatives: For higher toughness, consider Co10 or nickel-based alloys (e.g., Inconel 625); for extreme corrosion resistance, Stellite12 or Hastelloy C-series may be preferable.
· Environmental Limits: Avoid exposure to HF or strong reducing environments; high carbon may reduce impact resistance.
· Alternatives: For higher toughness, consider Co10 or nickel-based alloys (e.g., Inconel 625); for extreme corrosion resistance, Stellite12 or Hastelloy C-series may be preferable.
Conclusion
Co12 cobalt-based alloy excels in scenarios requiring ultra-high hardness, thermal stability, and wear resistance under extreme conditions. Its gas atomization process ensures high-density, consistent performance, making it ideal for applications in energy,化工, aerospace, and heavy industry. While costly and challenging to process, Co12 offers unmatched durability for high-stress environments where traditional steels or lower-alloy materials fail.
Frequently Asked Questions
What is the chemical composition of Co12 cobalt-based alloy?
Co12 consists of a Cobalt (Co) balance, 30.5% Chromium (Cr), 8.0% Tungsten (W), 1.5% Carbon (C), 1.5% Silicon (Si), and 2.5% each of Iron (Fe) and Nickel (Ni).
What is the hardness level of Co12?
Co12 has a Rockwell Hardness (HRC) of 40–50 HRC, which can increase up to 55 HRC after heat treatment. Its Vickers Hardness (HV) is approximately 1500–1700 HV.
Can Co12 alloy withstand high temperatures?
Yes, Co12 has a melting point of around 1480°C and maintains its structural integrity at high temperatures up to 800°C due to cobalt's solid-solution strengthening and tungsten's creep resistance.
Are there any environmental limitations for Co12?
Co12 has strong resistance to many acids, alkalis, and saline solutions, but it is less resistant to hydrofluoric acid (HF) and concentrated nitric acid (HNO₃). It should not be exposed to strong reducing environments.
What are the processing challenges of Co12?
Due to its extreme hardness, Co12 requires carbide tools or laser cutting for processing. Welding is also difficult and typically requires brazing or explosive bonding.
What are the recommended alternatives to Co12?
If higher toughness is needed, Co10 or nickel-based alloys like Inconel 625 can be used. For extreme corrosion resistance, Stellite 12 or Hastelloy C-series alloys are preferred alternatives.
What to know about this product?
SEND A MESSAGE
Something isn't Clear?
Feel free to contact me, and l will be morethan happy to answer all of your questions.